How to use the E-cloth® Cleaning System
All our products in the E-cloth® range can be used in the same way - with just water.
There is no impregnation in any of our products and you do not need to use any
chemicals when using our system. The E-cloth® can be used in a variety of ways to
maximise their effectiveness:
|
1. |
Wet: start wet for cleaning e.g. the car or the bath. Finish off damp. |
|
2. |
Damp:for all other surfaces - wet the cloth completely, wring out all excess water, fold and wipe all surfaces clean. |
|
3. |
Dry: for dusting only - drag the folded cloth across the surface. Dust is magnetised to the cloth. |
How to maintain your E-cloths
|
1. |
When dirty, our products can be washed at least 300 times. Either put them in a wash bag with your normal washing, or alternatively, boil them on the hob. |
|
2. |
In order for the cloths to perform correctly, they need to be kept clean with regular washing. They should be hot, boil washed at 90° in order to kill bacteria. NB. Initial washes should be at 60°. |
|
3. |
Always wash the cloths separately from other items to avoid adding fluff to the cloth. |
|
4. |
Do not use fabric softener or bleach. The fabric softener removes the static effect for dry use and bleach breaks down the micro fibres. |
|
5. |
Either tumble dry or hang dry. If too much washing powder is used, the fibres become blocked and the performance of the cloth is reduced. Wash the cloth a few times without any washing powder to remove the excess soap. |